THIS IS A BRAND NEW LED HEAD LIGHT BULB FOR YOUR MODEL A! IT IS AN INTERNALLY FOCUSED BULB MEANING THAT IT DOES NOT UTILIZE THE ORIGINAL REFLECTORS. THESE CAN BE USED ON 6 OR 12 VOLT AND POSITIVE OR NEGATIVE GROUND SYSTEMS. WITH THE LOW POWER DRAW, YOU CAN CONTINUE TO RUN YOUR ORIGINAL GENERATOR TOO!

THIS IS A 1/2 AMBER LED TAIL LIGHT INSERT FOR THE DRIVERS SIDE. THESE ARE AVERY NICE UPGRADE TO YOUR ORIGINAL TAIL LIGHTS. THEY WILL FIT MOST TAIL LIGHTS WITHOUT ANY PROBLEMS. SOME MAY REQUIRE A SLIGHT TRIM TO THE TAIL LIGHT RIM TO GT THEM TO FIT. 12 VOLT NEG GROUND. DIRECT PLUG IN REPLACEMENT. LICENSE TAG LIGHT INCLUDED

THIS IS A 1/2 AMBER LED TAIL LIGHT INSERT FOR THE DRIVERS SIDE. THESE ARE AVERY NICE UPGRADE TO YOUR ORIGINAL TAIL LIGHTS. THEY WILL FIT MOST TAIL LIGHTS WITHOUT ANY PROBLEMS. SOME MAY REQUIRE A SLIGHT TRIM TO THE TAIL LIGHT RIM TO GT THEM TO FIT. 12 VOLT NEG GROUND. DIRECT PLUG IN REPLACEMENT.

THIS IS AN ALL RED LED TAIL LIGHT INSERT FOR THE PASSENGERS SIDE. THESE ARE AVERY NICE UPGRADE TO YOUR ORIGINAL TAIL LIGHTS. THEY WILL FIT MOST TAIL LIGHTS WITHOUT ANY PROBLEMS. SOME MAY REQUIRE A SLIGHT TRIM TO THE TAIL LIGHT RIM TO GT THEM TO FIT. 12 VOLT NEG GROUND. DIRECT PLUG IN REPLACEMENT.

THIS IS AN ALL LED TAIL LIGHT INSERT FOR THE DRIVERS SIDE. THESE ARE AVERY NICE UPGRADE TO YOUR ORIGINAL TAIL LIGHTS. THEY WILL FIT MOST TAIL LIGHTS WITHOUT ANY PROBLEMS. SOME MAY REQUIRE A SLIGHT TRIM TO THE TAIL LIGHT RIM TO GT THEM TO FIT. 12 VOLT NEG GROUND. DIRECT PLUG IN REPLACEMENT. LICENSE TAG LIGHT INCLUDED

THIS IS A NEW STYLE FLASHER THAT ACTUALLY WORKS! THIS FLASHER WILL WORK ON ANY 6 VOLT, POSITIVE GROUND, APPLICATION,, UP TO A TOTAL OF 20 AMPS. THIS FLASHER IS COMPATIBLE WITH INCANDESCENT OR LED BULBS,, OR ANY COMBINATION OF BOTH. IT ALSO MAKES A VERY AUDIBLE"CLICKING" SOUND JUST LIKE THE OLD TIME FLASHERS.

THIS IS A VERY HANDY DEVICE JUST FOR YOUR MODEL A. ITS AN AUTOMATIC USB FOR 6 OR 12 VOLT SYSTEMS ,,, POSITIVE OR NEGATIVE GROUND. IT TURN ON ,,AUTOMATICALLY,, SO NO SWITCH ID REQUIRED!. GREAT FOR RUNNING YOUR GPS SYSTEM IN YOUR CAR. IT MOUNTS WITH 2 SCREWS. SEE OUT 236-618 FOR A MAGNETIC MOUNT.

THIS IS A VERY HANDY DEVICE JUST FOR YOUR MODEL A. ITS AN AUTOMATIC USB FOR 6 OR 12 VOLT SYSTEMS ,,, POSITIVE OR NEGATIVE GROUND. IT TURN ON ,,AUTOMATICALLY,, SO NO SWITCH ID REQUIRED!. GREAT FOR RUNNING YOUR GPS SYSTEM IN YOUR CAR. IT MOUNTS WITH 2 SCREWS. SEE OUT 236-617 FOR A SCREW MOUNT UNIT.

THIS IS A PREMIUM WIRING HARNESS MADE BY TYREE HARRIS. THIS THE MOST ACCURATE HARNESS MADE AND THE ONLY ONE THAT 100% FITS AND WORKS LIKE THE ORIGINAL. A MUST FOR FINE POINT BUILDERS! THE HUB FOR THE SWITCH IS CORRECT ON THESE . FITS ALL YEARS, 28-31 WITH COWL LIGHTS. ALL 100% MADE IN THE USA AND THE BEST YOUR MONEY CAN BUY!

THIS IS A PREMIUM WIRING HARNESS MADE BY TYREE HARRIS. THIS THE MOST ACCURATE HARNESS MADE AND THE ONLY ONE THAT 100% FITS AND WORKS LIKE THE ORIGINAL. A MUST FOR FINE POINT BUILDERS! THE HUB FOR THE SWITCH IS CORRECT ON THESE . FITS ALL YEARS, 28-31 WITHOUT COWL LIGHTS. ALL 100% MADE IN THE USA AND THE BEST YOUR MONEY CAN BUY!

THIS IS THE LED BULB FOR THE STOP LIGHT IN YOUR 6 VOLT MODEL A. THIS BULB IS AS BRIGHT A 1129 TRADITIONAL BULB BUT WITH ONLY ABOUT HALF THE CURRENT DRAW. THESE WILL LAST LONGER, BE MORE RELIABLE AND BRIGHTER , AND WORK PERFECTLY WITH A GENERATOR.

THE ARE A REPLACEMENT SET OF HEADLIGHT FOR 28-29. THEY BOLT RIGHT ON AND LOOK AND WORK JUST LIKE THE ORIGINAL LIGHTS

THIS A LED INSERT THAT REPLACES THE ORIGINAL LENS AND BULBS COMPLETELY, PIG TAILS PLUG INTO EXISTING BULB SOCKETS SO NO WIRING REQUIRED. THIS IS THE 1/2 AMBER AND RED LIGHT. THESE ARE UP TO 3 TIMES BRIGHTER THAN REGULAR LIGHT BULBS. FOR THE DRIVER SIDE TAIL LIGHT WITH TAG LIGHT. SOME MODIFICATION IS REQUIRED TO GET THESE UNITS TO FIT SOME TAIL LIGHT BEZELS.

THIS A LED INSERT THAT REPLACES THE ORIGINAL LENS AND BULBS COMPLETELY, PIG TAILS PLUG INTO EXISTING BULB SOCKETS SO NO WIRING REQUIRED. THIS IS THE 1/2 AMBER AND RED LIGHT. THESE ARE UP TO 3 TIMES BRIGHTER THAN REGULAR LIGHT BULBS. SOME MODIFICATION IS REQUIRED TO GET THESE UNITS TO FIT SOME TAIL LIGHT BEZELS

THIS IS A NEW THREADED INSERT TO PLACE THE ORIGINAL THREADED INSERT WHEN THE THREADS BECOME DAMAGED AND ARE NO LONGER USABLE. MUST BE SOLDERED OR BRAZED INTO THE PAN. PAN IS REQUIRED TO BE OFF THE ENGINE TO INSTALL. ... MADE IN USA

THIS IS A LED 3RD BRAKE LIGHT THAT CAN BE INSTALLED IN THE REAR WINDOW OF YOUR MODEL A. IT USES LED TECHNOLOGY SO IT'S VERY BRIGHT. COMES WITH MOUNTING HARDWARE AND INSTRUCTIONS. THIS MODEL IS 6 VOLT. CAN BE HOOKED UP POSITIVE OR NEGATIVE GROUND. MADE IN USA

THIS IS A LED 3RD BRAKE LIGHT THAT CAN BE INSTALLED IN THE REAR WINDOW OF YOUR MODEL A. IT USES LED TECHNOLOGY SO IT'S VERY BRIGHT. COMES WITH MOUNTING HARDWARE AND INSTRUCTIONS. THIS MODEL IS 12 VOLT. CAN BE HOOKED UP POSITIVE OR NEGATIVE GROUND. MADE IN USA

THIS IS THE BOOK YOU NEED TO SERVICE AND MAINTENANCE ON YOUR MODEL A

THIS BOOK EXPLAINS HOW TO INSTALL WOOD IN YOUR MODEL A AND ALSO SOME OF THE VARIOUS MODIFICATIONS AVAILABLE

THIS BOOK IS THE TROUBLE SHOOTING MANUEL

MEDIC SEAL IS A 2-PART MANGANESE CURED SEALER THAT IS USED TO REPAIR LEAKS IN FUEL TANKS. IT IS RESISTANCE TO ALL TYPES OF FLUIDS AND CAN WITHSTAND TEMPS UP TO 350 DEGREES F. IT CAN BE USED TO REPAIR THE LEAKS THAT COMMONLY OCCUR ON THE STEERING COLUMN MOUNT ON THE MODEL A GAS TANKS. IT IS ALSO BE PROVEN TO BE VERY EFFECTIVE IN REPAIRING EXTERNAL FREEZE CRACKS ON THE COOLING JACKETS ON MODEL A ENGINES. SETS IN ABOUT 4 HOURS AND IS DARK GRAY IN APPEARANCE. CAN BE PAINTED TO MATCH. COMES WITH FULL INSTRUCTIONS

THIS IS A LED REPLACEMENT COWL LIGHT SET UP WITH LED'S. 12 VOLT, NEG GROUND ONLY. LED'S ARE AMBER COLORED BEHIND A CLEAR LENS

THIS IS A REPLACEMENT LED COWL LIGHT SET UP FOR 30-31 CARS. 12 VOLT NEG GROUND ONLY REQ 2 PER CAR. LED'S ARE AMBER COLOR BEHIND A CLEAR LENS.